YOUTH SOLUTION SPLITBOARD

699.99 $

JonesLogo

The new Youth Solution is a high performance splitboard designed for youth and small adults.

This fully featured splitboard throws open the door for smaller riders to confidently ride advanced backcountry terrain and explore the wilderness. The Youth Solution has a directional rocker profile that excels in the inevitably variable backcountry snow conditions and a tapered directional shape that sinks the tail for better float in pow. The Youth Solution also features a 3D Contour Base 1.0 that helps eliminate edge catch and improve turn fluidity and Inner/Outer Traction Tech 3.0 edges for added grip on icy skin tracks or firm descents. For speed and durability, the Youth Solution is built with a blazing fast Sintered 8000 base and the Boltless Bridge plus Karakoram Split and Tip + Tail Clips.

  • 147
Effacer
Brands:Jones
UGS : J21SPYYSO Catégories : , , , Étiquette :

Description

YouthSolutionSplitboard

YouthSolutionSplitboard

1. Inside & outside Traction Tech 2.0

Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Inner edge Traction Tech

Inner edge Traction Tech improves splitboard edge grip on ascent. Three sidecut bumps on each side of your binding keep your locked in on icy skin tracks no matter which way you are traversing.

2. Progressive sidecut

At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

4. Boltless Bridge

The Boltless Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker, providing better torsional stiffness and a more powerful connection at the split clips.

Tapered shape, 12.5 mm

The tapered shape sinks the tail in pow for better float and quicker turns.

Directional flex pattern

Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.

Blunt nose

How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. – Jeremy Jones

YouthSolutionSplitboard

Directional Rocker

A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.

YouthSolutionSplitboard

3D Contour Base 1.0

Subtle yet effective 3D Contour Base featuring an even balance of 2mm spoon bevel in the nose and 2mm spoon bevel in the tail. Spoon bevel starts just after the rocker point.

Brand

Jones

Informations complémentaires

Grandeur